- Paper Pallet
- Process Wood Pallet
- Pallet Crate
- Air Dunnage Bag
- Container Desiccant
- Silica Gel & Desiccant Clay
- Composite Strap
- Packaging Materials & Adhesive Tapes
Axport Solution Sdn Bhd
11, Lot 19705, Jalan KPK 1/5,
Kawasan Perindustrian Kundang, Kundang Jaya,
48020 Rawang,
Selangor, Malaysia.
+603-6034 5784
+603-6034 5785
+603-6034 5786
+6016-260 3399
(Mr.Kelvin Pang)
+6016-697 7211
(JH/PG - Ms.Karen Lim)
+603-6034 5785
+603-6034 5786
+6016-260 3399
(Mr.Kelvin Pang)
+6016-697 7211
(JH/PG - Ms.Karen Lim)
+603-6034 5780
Process Wood Pallet Crate
| Previous | 1 / 2 | Next |
Benefits of using our process wood crate
Below is a comparison between our process wood crate & raw wood crate
| our process wood crate | raw wood crate |
| Made entirely from processed wood |
Made entirely from natural wood
|
| Internally free from termite & wood borers |
Not internally free from termite & wood borers
|
| Much higher fungus resistance because it has much lower internal moisture content |
Much lower fungus resistance because it has much higher internal moisture content
|
| Internal moisture content is less than 15% | |
|
Much less vulnerable to termite & wood borers from outside
|
Much more vulnerable to termite & wood borers from outside
|
|
Free from fumigation and heat treatment when export, due to crate is under ISPM 15 section 2.1 exemption
|
Fumigation and heat treatment is compulsory when export, due to crate is not under ISPM 15 section 2.1 exemption
|
|
ISPM 15’s toxic fumigation depletes ozone and causes health & safety issues
|
|
|
Much lower wood waste due to branches and wood strands are used completely to manufacture processed wood
|
Much higher wood waste due to branches and wood strands cannot be used to manufacture natural wood
|
Our types of processed wood
Our medium density fiberboard (MDF) is composed of wood fibers that are bonded together with resin under heat and pressure
Our plywood is composed of thin layers of wood veneer that are glued together
Our oriented strand board (OSB) is made from wood strands that are 8 to 15 centimetres long. These strands are mixed with resin to produce sheets. These sheets are layered and then bonded together under heat and pressure